Cisco Catalyst 3650 Series User Manual

switchport voice vlan
To specify to forward all voice traffic through the specified VLAN, use the switchport voice vlan command
in template configuration mode. Use the no form of this command to return to the default setting.
switchport voice vlanvlan_id
no switchport voice vlan
Syntax Description
Specifies to forward all voice traffic through the specified
VLAN.
switchport voice vlanvlan_id
Command Default
You can specify a value from 1 to 4094.
Command Modes
Template configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Examples
This example shows how to specify to forward all voice traffic through the specified VLAN.
Device(config-template)# switchport voice vlan 20
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
568
switchport voice vlan

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)