Cisco Catalyst 3650 Series

Policy maps:
•
AutoQos-4.0-Trust-Cos-Input-Policy
•
AutoQos-4.0-Output-Policy
Class maps:
•
class-default (match-any)
•
AutoQos-4.0-Output-Priority-Queue (match-any)
•
AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
•
AutoQos-4.0-Output-Trans-Data-Queue (match-any)
•
AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
•
AutoQos-4.0-Output-Scavenger-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
The following policy maps and class maps are created and applied when running the auto qos voip
cisco-softphone command:
Policy maps:
•
AutoQos-4.0-CiscoSoftPhone-Input-Policy
•
AutoQos-4.0-Output-Policy
Class maps:
•
AutoQos-4.0-Voip-Data-Class (match-any)
•
AutoQos-4.0-Voip-Signal-Class (match-any)
•
AutoQos-4.0-Multimedia-Conf-Class (match-any)
•
AutoQos-4.0-Bulk-Data-Class (match-any)
•
AutoQos-4.0-Transaction-Class (match-any)
•
AutoQos-4.0-Scavanger-Class (match-any)
•
AutoQos-4.0-Signaling-Class (match-any)
•
AutoQos-4.0-Default-Class (match-any)
•
class-default (match-any)
•
AutoQos-4.0-Output-Priority-Queue (match-any)
•
AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
•
AutoQos-4.0-Output-Trans-Data-Queue (match-any)
•
AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
•
AutoQos-4.0-Output-Scavenger-Queue (match-any)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
627
auto qos voip