show env
To display fan, temperature, and power information for the switch (standalone switch, stack master, or stack
member), use the show env command in EXEC modes.
show env { all | fan | power [all | switch [switch-number]] | stack [stack-number ] | temperature [status] }
Syntax Description
Displays fan, temperature and power environmental status.all
Displays the switch fan status.fan
Displays the power supply status.power
(Optional) Displays the status for all power supplies.all
(Optional) Displays the power supply status for a specific
switch.
switch switch-number
(Optional) Displays all environmental status for each switch
in the stack or for a specified switch. The range is 1 to 9,
depending on the switch member numbers in the stack.
stack switch-number
Displays the switch temperature status.temperature
(Optional) Displays the temperature status and threshold
values.
status
Command Default
No default behavior or values.
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the show env stack [switch-number] command to display information about any switch in the stack from
any member switch.
Use the show env temperature status command to display the switch temperature states and threshold levels.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
948
show env
To Next Page
Loading...
Need help?
General
