You must choose from the options under config type or stats client :
config type:
• client—Displays wireless client information
• port—Displays port-specific information
• radio—Displays wireless radio information
• ssid—Displays wireless SSID information
stats client :
• all—Displays statistics of all client.
• bssid—Valid range is from 1 to 4294967295.
• wlanid—Valid range is from to 1 4294967295
afd {config type | stats
client }
(Optional) ASIC number. Valid range is from 0 to 255.
asicasic_num
Displays per port dscp-cos counters. You must choose from the following options
under dscp-cos counters:
• iif_id id—The target interface ID. Valid range is from 1 to 4294967295.
• interface type number—Target interface type and ID.
dscp-cos counters {
iifd_id id | interface
type number }
You must choose from the following options under dscp-cos counters:
• iif_id id—The target interface ID. Valid range is from 1 to 4294967295.
• interface type number—Target interface type and ID.
leinfo
Displays configuration information related to policers in hardware. You must choose
from the following options:
• iif_id id—The target interface ID. Valid range is from 1 to 4294967295.
• interface type number—Target interface type and ID.
policer config
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
669
show platform hardware fed switch
To Next Page
Loading...
Need help?
General
