aaa authorization network
To the configure the switch to use user-RADIUS authorization for all network-related service requests, such
as IEEE 802.1x VLAN assignment, use the aaa authorization network command in global configuration
mode. To disable RADIUS user authorization, use the no form of this command
aaa authorization network default group radius
no aaa authorization network default
Syntax Description
Use the list of all RADIUS hosts in the server group as the default
authorization list.
default group radius
Command Default
Authorization is disabled.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the aaa authorization network default group radius global configuration command to allow the switch
to download IEEE 802.1x authorization parameters from the RADIUS servers in the default authorization
list. The authorization parameters are used by features such as VLAN assignment to get parameters from the
RADIUS servers.
Use the show running-config privileged EXEC command to display the configured lists of authorization
methods.
Examples
This example shows how to configure the switch for user RADIUS authorization for all network-related
service requests:
Device(config)# aaa authorization network default group radius
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
712
aaa authorization network
To Next Page
Loading...
Need help?
General
