Cisco Catalyst 3650 Series User Manual

◦
Flexible Lookup Pipeline Stages(FPS) : Indicates the forwarding decision that was taken for the
packet - routing or bridging
◦
Replication Bit Map : Determines if the packets should be sent to CPU or stack
◦
Local Data Copy = 1
◦
Remote Data copy = 0
◦
Local CPU Copy = 0
◦
Remote CPU Copy = 0
Examples
This is an example of output from the show platform hardware fed switch {switch_num | active | standby
} forward summary command.
Device#show platform hardware fed switch 1 forward summary
Time: Fri Sep 16 08:25:00 PDT 2016
Incomming Packet Details:
###[ Ethernet ]###
dst = 00:51:0f:f2:0e:11
src = 00:1d:01:85:ba:22
type = ARP
###[ ARP ]###
hwtype = 0x1
ptype = IPv4
hwlen = 6
plen = 4
op = is-at
hwsrc = 00:1d:01:85:ba:22
psrc = 10.10.1.33
hwdst = 00:51:0f:f2:0e:11
pdst = 10.10.1.1
Ingress:
Switch : 1
Port : GigabitEthernet1/0/1
Global Port Number : 1
Local Port Number : 1
Asic Port Number : 21
ASIC Number : 0
STP state :
blkLrn31to0: 0xffdfffdf
blkFwd31to0: 0xffdfffdf
Vlan : 1
Station Descriptor : 170
DestIndex : 0xF009
DestModIndex : 2
RewriteIndex : 2
Forwarding Decision: FPS 2A L2 Destination
Replication Bitmap:
Local CPU copy : 0
Local Data copy : 1
Remote CPU copy : 0
Remote Data copy : 0
Egress:
Switch : 1
Outgoing Port : GigabitEthernet1/0/9
Global Port Number : 9
ASIC Number : 0
Vlan : 1
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
99
show platform hardware fed switch forward

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)