Cisco Catalyst 3650 Series User Manual

network-policy profile (global configuration)
To create a network-policy profile and to enter network-policy configuration mode, use the network-policy
profile command in global configuration mode. To delete the policy and to return to global configuration
mode, use the no form of this command.
network-policy profile profile-number
no network-policy profile profile-number
Syntax Description
Network-policy profile number. The range is 1 to 4294967295.
profile-number
Command Default
No network-policy profiles are defined.
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use the network-policy profile global configuration command to create a profile and to enter network-policy
profile configuration mode.
To return to privileged EXEC mode from the network-policy profile configuration mode, enter the exit
command.
When you are in network-policy profile configuration mode, you can create the profile for voice and voice
signaling by specifying the values for VLAN, class of service (CoS), differentiated services code point (DSCP),
and tagging mode.
These profile attributes are contained in the Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) network-policy time-length-value (TLV).
Examples
This example shows how to create network-policy profile 60:
Device(config)# network-policy profile 60
Device(config-network-policy)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
56
network-policy profile (global configuration)

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)