aaa accounting identity
To enable authentication, authorization, and accounting (AAA) accounting for IEEE 802.1x, MAC
authentication bypass (MAB), and web authentication sessions, use the aaa accounting identity command
in global configuration mode. To disable IEEE 802.1x accounting, use the no form of this command.
aaa accounting identity {name | default } start-stop {broadcast group {name | radius | tacacs+} [group
{name | radius | tacacs+} ... ] | group {name | radius | tacacs+} [group {name | radius | tacacs+}... ]}
no aaa accounting identity {name | default }
Syntax Description
Name of a server group. This is optional when you enter it after the broadcast group
and group keywords.
name
Uses the accounting methods that follow as the default list for accounting services.default
Sends a start accounting notice at the beginning of a process and a stop accounting
notice at the end of a process. The start accounting record is sent in the background.
The requested-user process begins regardless of whether or not the start accounting
notice was received by the accounting server.
start-stop
Enables accounting records to be sent to multiple AAA servers and send accounting
records to the first server in each group. If the first server is unavailable, the switch
uses the list of backup servers to identify the first server.
broadcast
Specifies the server group to be used for accounting services. These are valid server
group names:
• name — Name of a server group.
• radius — Lists of all RADIUS hosts.
• tacacs+ — Lists of all TACACS+ hosts.
The group keyword is optional when you enter it after the broadcast group and group
keywords. You can enter more than optional group keyword.
group
(Optional) Enables RADIUS authorization.radius
(Optional) Enables TACACS+ accounting.tacacs+
Command Default
AAA accounting is disabled.
Command Modes
Global configuration
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
709
aaa accounting identity
To Next Page
Loading...
Need help?
General
