Cisco Catalyst 3650 Series User Manual

Examples
The following example shows how to enable the periodic sending of the sampler option table, which allows
the collector to map the sampler ID to the sampler type and rate:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# option sampler-table
The following example shows how to enable the periodic sending of the exporter statistics, including the
number of records, bytes, and packets sent:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# option exporter-stats
The following example shows how to enable the periodic sending of an options table, which allows the
collector to map the interface SNMP indexes provided in the flow records to interface names:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# option interface-table
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
459
option

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)