replicate
The following is the output of a show monitor session all command after completing these setup instructions:
Device# show monitor session all
Session 1
---------
Type : Local Session
Source Ports :
Both : Po13
Destination Ports : Gi2/0/36,Gi3/0/36
Encapsulation : Replicate
Ingress : Disabled
Filter VLANs : 1281
...
Related Commands
DescriptionCommand
Configures a FSPAN or FRSPAN destination session.
monitor session destination
Configures a FSPAN or FRSPAN session filter.
monitor session filter
Configures a FSPAN or FRSPAN source session.
monitor session source
Displays information about all SPAN and RSPAN sessions.
show monitor
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
504
monitor session