Cisco Catalyst 3650 Series User Manual

ttl
To configure the time-to-live (TTL) value, use the ttl command in flow exporter configuration mode. To
remove the TTL value, use the no form of this command.
ttl ttl
no ttl ttl
Syntax Description
Time-to-live (TTL) value for exported datagrams. The range is 1 to 255. The default is
255.
ttl
Command Default
Flow exporters use a TTL of 255.
Command Modes
Flow exporter configuration
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
To return this command to its default settings, use the no ttl or default ttl flow exporter configuration command.
Examples
The following example specifies a TTL of 15:
Device(config)# flow exporter FLOW-EXPORTER-1
Device(config-flow-exporter)# ttl 15
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
478
ttl

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)