vmps reconfirm (privileged EXEC)
To immediately send VLAN Query Protocol (VQP) queries to reconfirm all dynamic VLAN assignments
with the VLAN Membership Policy Server (VMPS), use the vmps reconfirm privileged EXEC command.
vmps reconfirm
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
You can verify your setting by entering the show vmps privileged EXEC command and examining the VMPS
Action row of the Reconfirmation Status section. The show vmps command shows the result of the last time
the assignments were reconfirmed either because the reconfirmation timer expired or because the vmps
reconfirm command was entered.
Examples
This example shows how to immediately send VQP queries to the VMPS:
Device# vmps reconfirm
Related Commands
DescriptionCommand
Displays the VQP version, reconfirmation interval, retry count, VMPS
IP addresses, and the current and primary servers.
show vmps
Changes the reconfirmation interval for the VQP client.
vmps reconfirm (global configuration)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1062
vmps reconfirm (privileged EXEC)
To Next Page
Loading...
Need help?
General
