Cisco Catalyst 3650 Series

clear location statistics
To clear radio-frequency identification (RFID) statistics, use the clear location statistics command in EXEC
mode.
clear location statistics
Syntax Description
This command has no arguments or keywords.
Command Default
No default behavior or values.
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
The following is sample output from the clear location rfid command and shows how to clear RFID statistics:
Device> clear location statistics
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
910
clear location statistics