Cisco Catalyst 3650 Series User Manual

show network-policy profile
To display the network-policy profiles, use the show network policy profile command in privileged EXEC
mode.
show network-policy profile [profile-number] [detail]
Syntax Description
(Optional) Displays the network-policy profile number. If no profile is entered,
all network-policy profiles appear.
profile-number
(Optional) Displays detailed status and statistics information.detail
Command Default
None
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Examples
This is an example of output from the show network-policy profile command:
Device# show network-policy profile
Network Policy Profile 10
voice vlan 17 cos 4
Interface:
none
Network Policy Profile 30
voice vlan 30 cos 5
Interface:
none
Network Policy Profile 36
voice vlan 4 cos 3
Interface:
Interface_id
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
97
show network-policy profile

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)