Cisco Catalyst 3650 Series User Manual

show env
To display fan, temperature, and power information, use the show env command in EXEC mode.
show env {all| fan| power [all| switch [stack-member-number]]| stack [stack-member-number] | temperature
[status]}
Syntax Description
Displays the fan and temperature environmental status and the status of
the internal power supplies.
all
Displays the switch fan status.fan
Displays the internal power status of the active switch.power
(Optional) Displays the status of all the internal power supplies in a
standalone switch when the command is entered on the switch, or in all
the stack members when the command is entered on the active switch.
all
(Optional) Displays the status of the internal power supplies for each
switch in the stack or for the specified switch.
This keyword is available only on stacking-capable switches.
switch
(Optional) Number of the stack member for which to display the status
of the internal power supplies or the environmental status.
The range is 1 to 9.
stack-member-number
Displays all environmental status for each switch in the stack or for the
specified switch.
This keyword is available only on stacking-capable switches.
stack
Displays the switch temperature status.temperature
(Optional) Displays the switch internal temperature (not the external
temperature) and the threshold values.
status
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
70
show env

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)