Cisco Catalyst 3650 Series User Manual

show capability feature monitor
To display information about monitor features, use the show capability feature monitor command in privileged
EXEC mode.
show capability feature monitor {erspan-destination | erspan-source}
Syntax Description
Displays information about the configured Encapsulated Remote Switched
Port Analyzer (ERSPAN) source sessions.
erspan-destination
Displays all the configured global built-in templates.erspan-source
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Examples
The following is sample output from the show capability feature monitor erspan-source command:
Switch# show capability feature monitor erspan-source
ERSPAN Source Session Supported: true
No of Rx ERSPAN source session: 8
No of Tx ERSPAN source session: 8
ERSPAN Header Type supported: II
ACL filter Supported: true
Fragmentation Supported: true
Truncation Supported: false
Sequence number Supported: false
QOS Supported: true
The following is sample output from the show capability feature monitor erspan-destination command:
Switch# show capability feature monitor erspan-destination
ERSPAN Destination Session Supported: false
Related Commands
DescriptionCommand
Creates an ERSPAN source session number or enters
the ERSPAN session configuration mode for the
session.
monitor session type erspan-source
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
520
show capability feature monitor

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)