Cisco Catalyst 3650 Series User Manual

clear flow exporter
To clear the statistics for a Flexible NetFlow flow exporter, use the clear flow exporter command in privileged
EXEC mode.
clear flow exporter [[name] exporter-name] statistics
Syntax Description
(Optional) Specifies the name of a flow exporter.name
(Optional) Name of a flow exporter that was previously configured.
exporter-name
Clears the flow exporter statistics.statistics
Command Modes
Privileged EXEC
Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SE
Usage Guidelines
The clear flow exporter command removes all statistics from the flow exporter. These statistics will not be
exported and the data gathered in the cache will be lost.
You can view the flow exporter statistics by using the show flow exporter statistics privileged EXEC
command.
Examples
The following example clears the statistics for all of the flow exporters configured on the device:
Device# clear flow exporter statistics
The following example clears the statistics for the flow exporter named FLOW-EXPORTER-1:
Device# clear flow exporter FLOW-EXPORTER-1 statistics
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
410
clear flow exporter

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)