Cisco Catalyst 3650 Series User Manual

show autonomic interfaces
To display information about the autonomic interfaces, use the show autonomic interfaces command in
privileged EXEC mode.
show autonomic interfaces
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was introduced.Cisco IOS XE Denali 16.3.1
Examples
To display information about the autonomic interfaces:
Device# show autonomic interfaces
Interface Channel Disc AD Enabled Intf Type
--------------------------------------------------------------------------------
GigabitEthernet0/0 None No L2 untagged If
GigabitEthernet1/0/1 None No L2 untagged If
GigabitEthernet1/0/2 None No L2 untagged If
GigabitEthernet1/0/3 Probing No L2 untagged If
GigabitEthernet1/0/4 None No L2 untagged If
GigabitEthernet1/0/5 None No L2 untagged If
GigabitEthernet1/0/6 None No L2 untagged If
GigabitEthernet1/0/7 None No L2 untagged If
GigabitEthernet1/0/8 None No L2 untagged If
GigabitEthernet1/0/9 None No L2 untagged If
GigabitEthernet1/0/10 None No L2 untagged If
GigabitEthernet1/0/11 None No L2 untagged If
GigabitEthernet1/0/12 None No L2 untagged If
GigabitEthernet1/0/13 None No L2 untagged If
GigabitEthernet1/0/14 None No L2 untagged If
GigabitEthernet1/0/15 None No L2 untagged If
GigabitEthernet1/0/16 None No L2 untagged If
GigabitEthernet1/0/17 None No L2 untagged If
GigabitEthernet1/0/18 None No L2 untagged If
GigabitEthernet1/0/19 None No L2 untagged If
GigabitEthernet1/0/20 None No L2 untagged If
GigabitEthernet1/0/21 None No L2 untagged If
GigabitEthernet1/0/22 None No L2 untagged If
GigabitEthernet1/0/23 None No L2 untagged If
GigabitEthernet1/0/24 None No L2 untagged If
GigabitEthernet1/1/1 None No L2 untagged If
GigabitEthernet1/1/2 None No L2 untagged If
TenGigabitEthernet1/1/3 None No L2 untagged If
TenGigabitEthernet1/1/4 None No L2 untagged If
Vlan1 None No Virtual If
ANI1 None Yes Virtual If
Loopback100000 None No Virtual If
Tunnel100002 None No Virtual If
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
896
show autonomic interfaces

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)