Cisco Catalyst 3650 Series User Manual

If this is the first port on which you have enabled auto-QoS, the auto-QoS-generated global configuration
commands are executed followed by the interface configuration commands. If you enable auto-QoS on another
port, only the auto-QoS-generated interface configuration commands for that port are executed.
After auto-QoS is enabled, do not modify a policy map or aggregate policer that includes AutoQoS in its name.
If you need to modify the policy map or aggregate policer, make a copy of it, and change the copied policy
map or policer. To use the new policy map instead of the generated one, remove the generated policy map
from the interface, and apply the new policy map.
To display the QoS configuration that is automatically generated when auto-QoS is enabled, enable debugging
before you enable auto-QoS. Use the debug auto qos privileged EXEC command to enable auto-QoS
debugging.
The following policy maps and class maps are created and applied when running the auto qos video cts
command:
Policy maps:
•
AutoQos-4.0-Trust-Cos-Input-Policy
•
AutoQos-4.0-Output-Policy
Class maps
•
class-default (match-any)
•
AutoQos-4.0-Output-Priority-Queue (match-any)
•
AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
•
AutoQos-4.0-Output-Trans-Data-Queue (match-any)
•
AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
•
AutoQos-4.0-Output-Scavenger-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
The following policy maps and class maps are created and applied when running the auto qos video ip-camera
command:
Policy maps:
•
AutoQos-4.0-Trust-Dscp-Input-Policy
•
AutoQos-4.0-Output-Policy
Class maps:
•
class-default (match-any)
•
AutoQos-4.0-Output-Priority-Queue (match-any)
•
AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
•
AutoQos-4.0-Output-Trans-Data-Queue (match-any)
•
AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
616
auto qos video

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)