•
AutoQos-4.0-Output-Scavenger-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
The following policy maps and class maps are created and applied when running the auto qos video
media-player command:
Policy maps:
•
AutoQos-4.0-Trust-Dscp-Input-Policy
•
AutoQos-4.0-Output-Policy
Class maps:
•
class-default (match-any)
•
AutoQos-4.0-Output-Priority-Queue (match-any)
•
AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
•
AutoQos-4.0-Output-Trans-Data-Queue (match-any)
•
AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
•
AutoQos-4.0-Output-Scavenger-Queue (match-any)
•
AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
To disable auto-QoS on a port, use the no auto qos video interface configuration command. Only the
auto-QoS-generated interface configuration commands for this port are removed. If this is the last port on
which auto-QoS is enabled, and you enter the no auto qos video command, auto-QoS is considered disabled
even though the auto-QoS-generated global configuration commands remain (to avoid disrupting traffic on
other ports affected by the global configuration).
Table 32: Traffic Types, Packet Labels, and Queues
All Other TrafficReal-Time
Video
Traffic
STP
7
BPDU
8
Traffic
Routing
Protocol
Traffic
VOIP
Control
Traffic
VOIP Data
Traffic
–
34564824, 2646DSCP
9
–
37635CoS
10
0, 1
(queue
4)
2 (queue
3)
0 (queue
3)
2, 3, 6, 7 (queue
2)
2, 3, 6, 7
(queue 2)
2, 3, 6, 7
(queue 2)
4, 5
(queue 1)
CoS-to-egress
queue map
7
STP = Spanning Tree Protocol
8
BPDU = bridge protocol data unit
9
DSCP = Differentiated Services Code Point
10
CoS = class of service
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
617
auto qos video
To Next Page
Loading...
Need help?
General
