Cisco Catalyst 3650 Series

Examples
The following example shows that various 802.1X retransmission and timeout periods have been set:
Device(config)# configure terminal
Device(config)# interface g1/0/3
Device(config-if)# dot1x port-control auto
Device(config-if)# dot1x timeout auth-period 2000
Device(config-if)# dot1x timeout held-period 2400
Device(config-if)# dot1x timeout quiet-period 600
Device(config-if)# dot1x timeout start-period 90
Device(config-if)# dot1x timeout supp-timeout 300
Device(config-if)# dot1x timeout tx-period 60
Device(config-if)# dot1x timeout server-timeout 60
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
756
dot1x timeout