Cisco Catalyst 3650 Series User Manual

CHAPTER 14 QoS 641
class 642
class-map 645
match (class-map configuration) 647
match non-client-nrt 650
policy-map 651
priority 654
queue-buffers ratio 656
queue-limit 658
service-policy (Wired) 660
set 662
show class-map 667
show platform hardware fed switch 668
show platform software fed switch qos 672
show platform software fed switch qos qsb 673
show policy-map 676
trust device 678
PART XI Routing 681
CHAPTER 15 Bidirectional Forwarding Detection 683
authentication (BFD) 684
bfd 685
bfd all-interfaces 687
bfd check-ctrl-plane-failure 688
bfd echo 689
bfd slow-timers 691
bfd template 693
bfd-template 694
ip route static bfd 695
ipv6 route static bfd 697
PART XII Security 699
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
xv
Contents

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)