2-B - - - -
9-A 100WAC LIT141307RK OK RPS 1100
9-B esent
This is an example of output from the show env xps system command:
Switch#
=======
XPS 0101.0100.0000 :
============================================================================
XPS Cfg Cfg RPS Switch Current Data Port XPS Port Name
Mode Role Pri Conn Role-State Switch #
---- -------------------- ---- ------- --- ------ ---------- --------
1 - On Auto-SP 1 Yes SP-PS -
2 - On Auto-SP 2 Yes SP-PS -
3 - On Auto-SP 3 No - -
4 none On Auto-SP 5 No - -
5 - Off Auto-SP 6 No - -
6 - On Auto-SP 7 No - -
7 - On Auto-SP 8 No - -
8 - On Auto-SP 9 No -
9 test On Auto-SP 4 Yes RPS-NB
This is an example of output from the show env xps thermal command:
Switch#
=======
XPS 0101.0100.0000 :
=============================================
Fan Status
---- -----------
1 OK
2 OK
3 NOT PRESENT PS-1 NOT PRESENT PS-2 OK Temperature is OK
This is an example of output from the show env xps upgrade command when no upgrade is occurring:
Switch# show env xps upgrade
No XPS is connected and upgrading.
These are examples of output from the show env xps upgrade command when an upgrade is in process:
Switch# show env xps upgrade
XPS Upgrade Xfer
SW Status Prog
-- ----------- ----
1 Waiting 0%
Switch#
*Mar 22 03:12:46.723: %PLATFORM_XPS-6-UPGRADE_START: XPS 0022.bdd7.9b14 upgrade has
started through the Service Port.
Switch# show env xps upgrade
XPS Upgrade Xfer
SW Status Prog
-- ----------- ----
1 Receiving 1%
Switch# show env xps upgrade
XPS Upgrade Xfer
SW Status Prog
-- ----------- ----
1 Receiving 5%
Switch# show env xps upgrade
XPS Upgrade Xfer
SW Status Prog
-- ----------- ----
1 Reloading 100%
Switch#
*Mar 22 03:16:01.733: %PLATFORM_XPS-6-UPGRADE_DONE: XPS 0022.bdd7.9b14 upgrade has
completed and the XPS is reloading.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
952
show env xps
To Next Page
Loading...
Need help?
General
