The uppercase field names in the display output of the show flowmonitor monitor-name cache command
are key fields that Flexible NetFlow uses to differentiate flows. The lowercase field names in the display
output of the show flow monitor monitor-name cache command are nonkey fields from which Flexible
NetFlow collects values as additional data for the cache.
Examples
The following example displays the status for a flow monitor:
Device# show flow monitor FLOW-MONITOR-1
Flow Monitor FLOW-MONITOR-1:
Description: Used for basic traffic analysis
Flow Record: flow-record-1
Flow Exporter: flow-exporter-1
flow-exporter-2
Cache:
Type: normal
Status: allocated
Size: 4096 entries / 311316 bytes
Inactive Timeout: 15 secs
Active Timeout: 1800 secs
Update Timeout: 1800 secs
This table describes the significant fields shown in the display.
Table 51: show flow monitor monitor-name Field Descriptions
DescriptionField
Name of the flow monitor that you configured.Flow Monitor
Description that you configured or the monitor, or
the default description User defined.
Description
Flow record assigned to the flow monitor.Flow Record
Exporters that are assigned to the flow monitor.Flow Exporter
Information about the cache for the flow monitor.Cache
Flow monitor cache type.
The possible values are:
• immediate—Flows are expired immediately.
• normal—Flows are expired normally.
• Permanent—Flows are never expired.
Type
Status of the flow monitor cache.
The possible values are:
• allocated—The cache is allocated.
• being deleted—The cache is being deleted.
• not allocated—The cache is not allocated.
Status
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
955
show flow monitor
To Next Page
Loading...
Need help?
General
