Telit Wireless Solutions LE910 User Manual

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 144 of 509
Mod. 0808 2011-07 Rev.2
<Guaranteed bitrate DL> - the guaranteed bitrate down
link(kbits/s)
0 (default value)
1…42200 ( not yet supported by Intel)
<Delivery order>
- SDU Delivery order
0 - no (for default value)
1 – yes
<Maximum SDU size
> - Maximum SDU size in octets
0 (default value)
10…1520
<SDU error ratio>
- SDU error ratio
- mEe mean m*10-e , for example 1E2 mean 1*10-2
“0E0” (default value)
“1E1”
“1E2”
“7E3”
“1E3”
“1E4”
“1E5”
“1E6”
<Residual bit error ratio>
- Residual bit error ratio
- mEe mean m*10-e , for example 1E2 mean 1*10-2
“0E0” (default value)
“5E2”
“1E2”
“5E3”
“4E3”
“1E3”
“1E4”
“1E5”
“1E6”
“6E8”
<Delivery of erroneous SDUs>
- Delivery of erroneous SDUs
0 - no (default value)
1 – yes
2 – no detect
<Transfer delay > - Transfer delay (milliseconds)

Telit Wireless Solutions LE910 Specifications

General

Brand	Telit Wireless Solutions
Model	LE910
Category	Control Unit
Language	English