To Next Page

To Previous Page

Telit LE910 V2 Series AT Commands

80446ST10707A Rev. 0– 2015-11-03

Mod. 0808 2011-07 Rev.2

#SERVINFO - Serving Cell Information

SELINT 2

<UARFCN> - UMTS ARFCN of the serving cell

<PSC> - Primary Synchronisation Code

<DRX> - Discontinuous reception cycle length

<SD> - Service Domain

0 – No Service

1 – CS Only

2 – PS Only

3 – CS & PS

<RSCP> - Received Signal Code Power in dBm

<EARFCN> - E-UTRA Assigned Radio Channel

<PhysicalCellId> - Physical Cell ID

<TAC> - Tracking Area Code

<RSRP> - Reference Signal Received Power

<URA> - UTRAN Registration Area Identity

During a call, a SMS sending/receiving or a location update the value of <GPRS>, <PB-

ARFCN>, <NOM>, <RAC> and <PAT> parameters don’t make sense.

AT#SERVINFO=?

Test command tests for command existence.

#SERVINFO - Serving Cell Information

SELINT 2

AT#SERVINFO

Execution command reports information about serving cell, in the format:

(GSM network)

#SERVINFO: <B-ARFCN>,<dBM>,<NetNameAsc>,<NetCode>,

<BSIC>,<LAC>,<TA>,<GPRS>[,[<PB-ARFCN>],[<NOM>],

<RAC>,[<PAT>]]

(UMTS network)

#SERVINFO: <UARFCN>, <dBM>, <NetNameAsc>,<NetCode>,

where:

<B-ARFCN> - BCCH ARFCN of the serving cell

<dBM> - received signal strength in dBm

<NetNameAsc> - operator name, quoted string type

<NetCode> - string representing the network operator in numeric format:

5 or 6 digits [country code (3) + network code (2 or 3)]

<BSIC> - Base Station Identification Code

<LAC> - Localization Area Code

<TA> - Time Advance: it’s available only if a GSM or GPRS is running

<GPRS> - GPRS supported in the cell

0 - not supported

1 - supported

The following information will be present only if GPRS is supported in the cell

Brand	Telit Wireless Solutions
Model	LE910
Category	Control Unit
Language	English

Telit Wireless Solutions LE910 User Manual

Table of Contents

Questions and Answers:

Telit Wireless Solutions LE910 Specifications

Related product manuals