Cisco Catalyst 3650 Series User Manual

Command History
ModificationRelease
This command was introduced.Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The undebug sw-vlan command is the same as the no debug sw-vlan command.
Examples
This example shows how to display debug messages for VLAN manager events:
Device# debug sw-vlan events
Related Commands
DescriptionCommand
Enables debugging of the VLAN manager IOS file system (IFS) error
tests.
debug sw-vlan ifs
Enables debugging of VLAN manager notifications.
debug sw-vlan notification
Enables debugging of the VTP code.
debug sw-vlan vtp
Displays the parameters for all configured VLANs or one VLAN (if the
VLAN ID or name is specified) in the administrative domain.
show vlan
Displays general information about VTP management domain, status, and
counters.
show vtp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1010
debug sw-vlan

Cisco Catalyst 3650 Series Specifications

General

RAM	4 GB
Flash Memory	4 GB
Ports	24 or 48 10/100/1000 Ethernet ports
Uplinks	4 x 1G SFP or 4 x 10G SFP+ (depending on model)
Stacking	Up to 9 switches with StackWise-160
Layer Support	Layer 2, Layer 3
Software	Cisco IOS Software
Power Supply	Internal power supply; optional redundant power supply available
Storage Temperature	-40°F to 158°F (-40°C to 70°C)