AKD BASIC User Guide | 6 AKD BASIC Parameters, Operators, Statements
6.25.12 PL.MODP1
General Information
Type R/W parameter
Description Sets modulo range parameter.
Units
Depends on UNIT.PROTARY and UNIT.PLI-
NEAR
Range N/A
Default
Value
N/A
Data Type Float
See Also N/A
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
EtherCAT COE and CAN-
open
3637h/0 M_01-00-00-000
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 604 Yes 64 bit Yes M_01-03-00-000
AKD BASIC Information
Data Type Integer
Description
This parameter is either the beginning or the end of the modulo range, depending on whether
this value is smaller or larger than PL.MODP2. If you set PL.MODP1 equal to PL.MODP2, an
error message occurs.
Condition Beginning of the modulo-range End of the modulo-range
PL.MODP1 < PL.MODP2 PL.MODP1 PL.MODP2
PL.MODP2 < PL.MODP1 PL.MODP2 PL.MODP1
Related Topics
PL.ERR | PL.ERRFTHRESH | PL.ERRMODE | PL.ERRWTHRESH
Kollmorgenâ„¢ | March 30, 2012 398
To Next Page
Loading...
Need help?
General
