Kollmorgen AKD Basic

AKD BASIC User Guide | 6 AKD BASIC Parameters, Operators, Statements
6.28.5 REGEN.WATTEXT
General Information
Type R/W parameter
Description
Sets the regen resistor's power fault level for an external regen
resistor.
Units W
Range 0 to 62,000 W
Default
Value
1000 W
Data Type Integer
See Also N/A
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
EtherCAT COE and CAN-
open
3414h/0
M_01-00-00-000
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 744 No 16 bit No M_01-03-00-000
Description
Sets the regen resistor's power fault level for an external regen resistor (when REGEN.TYPE =
-1).
Above this fault level, the regen resistor's PWM wil be 0 and a fault will be issued.
Kollmorgen™ | March 30, 2012 422