Kollmorgen AKD Basic

AKD BASIC User Guide | 6 AKD BASIC Parameters, Operators, Statements
6.17.1 FB3.MODE
General Information
Type NV Parameter
Description Selects the type of feedback connected to X9.
Units N/A
Range 0
Default Value 0
Data Type Integer
See Also NA
Start Version M_01-04-15-000
Fieldbus Index/Subindex
Modbus 1044
Description
This parameter selects the type of feedback connected to X9. The position is reported as the
tertiary feedback position, by FB3.P.
Value Feedback
0 Endat 2.2 Feedback Device
This parameter is only supported on drives with model numbers similar to AKD-x-xxxxx-NBxx-
xxxx.
Kollmorgen™ | March 30, 2012 298