AKD BASIC User Guide | 6 AKD BASIC Parameters, Operators, Statements
6.11.3 DRV.BLINKDISPLAY
General Information
Type Command
Description
Causes the display to blink for 10 sec-
onds.
Units N/A
Range N/A
Default
Value
N/A
Data Type N/A
See Also N/A
Start Version M_01-00-00-000
Description
DRV.BLINKDISPLAY causes the drive display located on the front of the drive to blink for 10
seconds.
This command allows the user to identify the drive that is currently communicating with Work-
Bench.
Kollmorgenâ„¢ | March 30, 2012 218
To Next Page
Loading...
Need help?
General
