Kollmorgen AKD Basic

AKD BASIC User Guide | 6 AKD BASIC Parameters, Operators, Statements
6.4.10 AOUT.VALUEU
General Information
Type R/W Parameter
Description
Sets the analog output
value.
Units V
Range –10 to +10 V
Default
Value
0
Data Type Float
See Also N/A
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
EtherCAT COE and CAN-
open
3470h/3 M_01-00-00-000
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 32 Yes 64 bit Yes M_01-03-00-000
Description
AOUT.VALUEU reads/writes the analog output value when AOUT.MODE = 0 (analog output
signal is determined by the user).
Kollmorgen™ | March 30, 2012 150