Kollmorgen AKD Basic User Manual

AKD BASIC User Guide | 6 AKD BASIC Parameters, Operators, Statements
6.11.27 DRV.NVSAVE
General Information
Type Command
Description
Saves the drive parameters from the RAM to the NV mem-
ory.
Units N/A
Range N/A
Default
Value
N/A
Data Type N/A
See Also DRV.RSTVAR
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
EtherCAT COE and CAN-
open
1010h/1
35EBh/0
M_01-00-00-000
Fieldbus Index/Subindex Is 64 bit? Attributes Signed?
Modbus 938 No Command No
Description
DRV.NVSAVE saves the current drive parameter values from the RAM to the NV memory.
The drive parameters that were saved to the NV are read from the NV on the next drive boot,
causing the values to be automatically set to the saved values on every drive boot.
Executing DRV.RSTVAR does not modify the values of the NV, but instead sets the drive
values in RAM to their defaults.
Kollmorgen™ | March 30, 2012 244

Kollmorgen AKD Basic Specifications

General

Brand	Kollmorgen
Model	AKD Basic
Category	Controller
Language	English