Telit Wireless Solutions LE910 User Manual

Telit LE910 V2 Series AT Commands
80446ST10707A Rev. 0– 2015-11-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 282 of 509
Mod. 0808 2011-07 Rev.2
#CSURV - Network Survey
SELINT 2
CELL_OTHER - none of the above e.g. exclusion timer running, no BCCH
available…etc.
<numArfcn>
- decimal number; it is the number of valid channels in the
Cell Channel Description
<arfcn n >
- decimal number; it is the arfcn of a valid channel in the Cell
Channel Description ( n is in the range
1..<numArfcn>
)
<numChannels>
- decimal number; it is the number of valid channels in
the BCCH Allocation list; the output of this information for non-
serving cells depends on last
#CSURVEXT
setting:
2. if
#CSURVEXT=0
this information is displayed only for
serving cell
3. if
#CSURVEXT=1, 2
or
3
this information is displayed also
for every valid scanned BCCH carrier.
<ba n >
- decimal number; it is the arfcn of a valid channel in the BA list (
n
is in the range
1..<numChannels>
); the output of this
information for non-serving cells depends on last
#CSURVEXT
setting:
1. if
#CSURVEXT=0
this information is displayed only for
serving cell
2. if
#CSURVEXT=1
or
2
this information is displayed also for
every valid scanned BCCH carrier.
(The following informations will be printed only if GPRS is supported in the
cell)
<pbcch
> - packet broadcast control channel
0 - pbcch not activated on the cell
1 - pbcch activated on the cell
<nom
> - network operation mode
1
2
3
<rac
> - routing area code
0..255 -
<spgc
> - SPLIT_PG_CYCLE support
..0 - SPLIT_PG_CYCLE is not supported on CCCH on this cell
..1 - SPLIT_PG_CYCLE is supported on CCCH on this cell
<pat>
- priority access threshold
0 -
3..6 -
<nco>
- network control order
0..2 -
<t3168> - timer 3168

Telit Wireless Solutions LE910 Specifications

General

Brand	Telit Wireless Solutions
Model	LE910
Category	Control Unit
Language	English