YASKAWA NX100 User Manual

3 Teaching
3.9 Other Job-editing Functions
3-61
149235-1CD
RE-CSO-A031
9 Select “EXECUTE.” The speed is changed according to the setting.
Operation Explanation
• If instructions that include specific speed data
such as SPEED or ARCON instructions (including
speed data of the welding condition file) exist in
the specified section, the speed data for those
steps are not changed. Therefore, in such cases,
the set time and the actual time required are not
same.
• If the speed data is limited by the maximum value,
the following message is displayed.
NOTE
!Limited to maximum speed
125 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C