YASKAWA NX100 User Manual

7 External Memory Devices
7.3 Operation Flow
7-27
149235-1CD
RE-CSO-A031
 Loading Data
To upload data from the external memory device to the memory of the NX100, follow the procedure in
the following.
Loading a Job
Data such as PARAMETER, SYSTEM DATA, I/O DATA, and the batch data such as
PARAMETER BATCH, BATCH CMOS, ALL CMOS AREA, that include PARAMETER,
SYSTEM DATA, I/O DATA, contain the information specific to each robot controller.
Those data are prepared as backup data for reloading into the controller used for saving.
Loading the data from other controller may result in destruction or loss of critical system
information.
Take extra care for the saved data.
Operation Explanation
1 Select {FD/PC CARD} under
the main menu.
2 Select {LOAD}. The following window appears.
3 Select {JOB}. The job selection window appears.
NOTE
DATA UTILITY
EDIT
DISPLAY
Main Menu ShortCut
FLOPPY DISK/Compact Flash
CF (LOAD) UN-USED MEMORY 55.32 MB
FOLDER
 JOB
 FILE/GENERAL DATA
 BATCH USER MEMORY
 PARAMETER
 SYSTEM DATA
 I/O DATA
 BATCH CMOS
 ALL CMOS AREA
57
0
0
0
0
0
0
0
DATA UTILITY
EDIT
DISPLAY
Main Menu ShortCut
FLOPPY DISK/Compact Flash
CF (LOAD) SINGLE NO. 33
FOLDER
AA36
AA5
AA8
N1
TEST3
TEST3A-’
TEST3A--
TEST3A-3
TEST3A-6
TEST3A-9
TEST3A-C
AA37
AA6
AA9
TEST
TEST3A
TEST3A-(
TEST3A-1
TEST3A-4
TEST3A-7
TEST3A-A
TEST3A-D
AA35
AA4
AA7
N
TEST2
TEST3A-!
TEST3A-)
TEST3A-2
TEST3A-5
TEST3A-8
TEST3A-B
271 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C