YASKAWA NX100 User Manual

9 Arc Welding Application
9.6 Changing Welding Conditions During Playback
9-63
149235-1CD
RE-CSO-A031
 ARCCTS and ARCCTE Instructions
The arc condition adjustment operation is invalid while the slope up/down instruction ARCCTS or
ARCCTE is executed.
Even if “Change data” is set on the ARC COND ADJUSTMENT window, rewriting cannot be done after
the ARCCTS or ARCCTE instruction.
No Rewriting
:
ARCON ASF#(1)
ARCCTE
AC=150 AVP=100
MOVL
ARCSET AC=200
MOVL
:
Refer to section 9.3.8 "Slope Up/Down Function" for details regarding the ARCCTS and
ARCCTE instructions.
SUPPLE
-MENT
406 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C