YASKAWA NX100 - S3 C024 to S3 C031: S-AXIS INTERFERENCE AREA

8 Parameter
8.4 Parameters according to Interference Area
8-33
149235-1CD
RE-CSO-A031
 S3C024 to S3C031: S-AXIS INTERFERENCE AREA
These parameters specify auxiliary functions of S2C002 parameter. For details, see the explanation of
the S2C002 parameter.
 S3C032 to S3C543: CUBIC INTERFERENCE AREA
These parameters specify auxiliary functions of S2C003 to S2C034 parameters. For details, see the
explanation of the S2C003 to S2C050 parameters.
 S3C801 to S3C804: ROBOT INTERFERENCE AREA
These parameters specify auxiliary functions of S2C188 to S2C193 parameters. For details, see the
explanation of the S2C188 to S2C193 parameters.
 S3C805: A SIDE LENGTH OF WORK-HOME-POSITION CUBE
Units: 1μm
This parameter specifies a side length of the cube for the work home position.
322 of 493