YASKAWA NX100 User Manual

9 Arc Welding Application
9.4 Registering Arc Welding Instructions
9-22
149235-1CD
RE-CSO-A031
 Setting Welding End Conditions
The ARCOF instruction can be registered in any of the following four ways:
• With additional items to specify conditions
ARCOF AC=160 AVP=70 T=0.50 ANTSTK
• With an arc end condition file
ARCOF AEF#(1)
In this case, the welding condition is set using the arc end condition file. (Refer to section
9.5 "Welding Condition Files".”)
• Without additional items
ARCOF
When the crater process is performed by changing the welding condition when welding is
completed, before the ARCOF instruction is executed, the welding condition needs to be
set using the welding condition setting instruction. (Refer to section 9.4.3 "ARCSET").
With Additional Items to Specify Conditions
Operation Explanation
1 Select the ARCOF instruction
in the instruction area.
The ARCOF instruction appears in the input buffer line.
2 Press [SELECT]. The DETAIL EDIT window appears.
JOB
EDIT
DISPLAY
UTILITY
Main Menu ShortCut
! Turn on servo power
JOB CONTENT
JOB NAME: WORK A
0000 NOP
0001 MOVJ VJ=80.00
0002 MOVL V=800
0003 ARCON
0004 MOVL V=50
0005 MOVL V=50
0006 MOVL V=50
0007 END
ARCOF
TOOL: 00
CONTROL GROUP: R1
STEP NO: 0003
DATA
EDIT
DISPLAY
UTILITY
Main Menu ShortCut
! Turn on servo power
DETAIL EDIT
ARCOF
ARCOF
SET METHOD
: UNUSED
365 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C