To Next Page

To Previous Page

7 External Memory Devices

7.2 Handling Data

7-8

149235-1CD

RE-CSO-A031

7.2.2 Collective Backup

For the NX100, four types of collective backup are available: CMOS.BIN, CMOSBK.BIN,

ALCMSxx.HEX, and CMOSxx.HEX.

 CMOS.BIN

For the normal backup, use this data.

Save: Perform in the maintenance mode (the editing mode or higher.)

Load: Perform in the maintenance mode (the management mode.)

As for the load/save procedures, refer to “NX100 INSTRUCTIONS”.

Target Area: All areas of the internally-stored data. (Note that the monitoring time is not loaded.)

 CMOSBK.BIN

This data is used in the automatic backup function.

Save: In the normal mode, saves with the preset conditions.

Load: Perform for the system restoration in the maintenance mode (the management mode.)

For details, refer to “NX100 INSTRUCTIONS”.

Target Area: All areas of the internally-stored data. (Note that the monitoring time is not loaded.)

 CMOSxx.HEX

This data is loaded/saved in the FD/CF menu of the normal mode.

Save: Perform in the normal mode (the editing mode or higher.)

Load: Perform in the normal mode (the management mode.)

For details, refer to the following pages.

Target Area: The collected data including "Job File", "Data File", "Parameter File", "System

Data", and "I/O Data" which can be individually loaded/saved in the FD/CF menu. Because

the setting information of robot etc. are not included in the collected data, the system cannot

be completely restored.

 ALCMSxx.HEX

This data is for the manufacturer only. Users can save but cannot load this data.

In order to save the batch data, the following free space per file is needed in the Compact Flash card.

JZNC-NIF01-1: (The number of stored file + 1) x 7.5 MByte

JZNC-NIF01-2: (The number of stored file + 1) x 11.0 MByte

Note that the free space for one working file is needed in addition to the above mentioned space when

using the automatic backup function.

Besides, it is recommended to store the backup data in two or more Compact Flash cards to minimize

problems if the Compact Flash card is damaged.

252 of 493

YASKAWA NX100 User Manual

Other manuals for YASKAWA NX100