YASKAWA NX100 User Manual

5 Editing Jobs
5.3 Modifying Job Names
5-8
149235-1CD
RE-CSO-A031
5.3 Modifying Job Names
This operation is used to modify the name of a job that is registered. The operation can be performed
in either the JOB CONTENT window or the JOB LIST window.
5.3.1 Modifying Job Names on the JOB CONTENT Window
Operation Explanation
1 Select {JOB} under the main
menu.
2 Select {JOB}. The JOB CONTENT window appears.
3 Select {JOB} from the menu. The pull-down menu appears.
4 Select {RENAME JOB} under
the pull-down menu.
JOB
EDIT
DISPLAY
UTILITY
JOB CONTENT
JOB NAME: JOB-A
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
TOOL: 00
CONTROL GROUP: R1
STEP NO: 0003
JOB
EDIT
DISPLAY
UTILITY
JOB NAME: JOB-A
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
CONTROL GROUP: R1
CREATE NEW JOB
SELECT JOB
CALL MASTER JOB
RENAME JOB
COPY JOB
TOOL: 00
STEP NO: 0003
192 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C