YASKAWA NX100 User Manual

9 Arc Welding Application
9.5 Welding Condition Files
9-48
149235-1CD
RE-CSO-A031
9.5.5 Arc Auxiliary Condition File
An arc auxiliary condition file has the following three parts:
• Arc Retry Function Setting
• Arc Restart Function Setting
• Automatic Wire Anti-stick Function Setting
 Arc Retry Function Setting
NO. (0 to 9 times)
Maximum repetition count for the arc retry process.
RETRACT TIME (0 to 2.50 seconds)
Wire retracting time in the arc retry process.
REPLAY DISTANCE (0 to 99.9 mm)
Manipulator moving distance for an arc retry process at the replay mode.
SPEED (1 to 600 cm/min)
Speed of the manipulator when it returns to the welding start point at arc retry.
CURRENT (1 to 999A)
Welding current output when the manipulator returns to the welding start point at arc retry.
VOLTAGE (0 to 50.0V, 50 to 150%)
Welding voltage output when the manipulator returns to the welding start point at arc retry.
DATA
EDIT
DISPLAY
UTILITY
Main Menu
ShortCut
! Turn on servo power
ARC AUXILIARY COND
COND NO.: 1
<RETRY FUNCTION SET>
NO.
RETRACT TIME
REPLAY DISTANCE
SPEED
CURRENT
VOLTAGE
: 1 times
: 1.50 sec
: 10.0 mm
: 30 cm/min
: 100 A
: 100 %






391 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C