YASKAWA NX100 - NX100 Overview

1 Introduction
1.1 NX100 Overview
1-1
149235-1CD
RE-CSO-A031
1 Introduction
1.1 NX100 Overview
The main power switch and the door lock are located on the front of the NX100 controller. The
emergency stop button is installed in the upper right corner of the cabinet door and the programming
pendant hangs from a hook below the button.
For information on setup, installation, and connection of the NX100 system, refer to the “NX100
INSTRUCTIONS.”
NX100 Front View
Main power switch
Door lock
Door lock
25 of 493