YASKAWA NX100 - Power Source Condition File Initial Value

9 Arc Welding Application
9.13 Power Source Condition File Initial Value
9-96
149235-1CD
RE-CSO-A031
9.13 Power Source Condition File Initial Value
The initial value data for 24 Power Sources has been prepared as follows:
The initial values are available for the standard software version NS4.00.00A ()-00 or later.
Welder Condition Data File
Power
Source
No.
Power Source Name
Power
Supply
Shielding
Gas
Wire
Diameter
(mm)
1 MOTOWELD-E series 350A class Synergic MAG
(or CO2)
1.2
(or any)
2 MOTOWELD-E series 350A class Independent MAG
(or CO2)
1.2
(or any)
3 MOTOWELD-E series 500A class Synergic MAG
(or CO2)
1.2
(or any)
4 MOTOWELD-E series 500A class Independent MAG
(or CO2)
1.2
(or any)
5 MOTOWELD-S350-AJ2/3 (without STC) Synergic CO2 1.2
6 MOTOWELD-S350-AJ2/3 (without STC) Synergic MAG 1.2
7 MOTOWELD-S350-AJ2/3 (without STC) Independent CO2 1.2
8 MOTOWELD-S350-AJ2/3 (without STC) Independent MAG 1.2
9 MOTOWELD-S350-AJ2/3 (without STC) Synergic CO2 0.9
(or 1.0)
10 MOTOWELD-S350-AJ2/3 (without STC) Synergic MAG 0.9
(or 1.0)
11 MOTOWELD-S350-AJ2/3 (without STC) Independent CO2 0.9
(or 1.0)
12 MOTOWELD-S350-AJ2/3 (without STC) Independent MAG 0.9
(or 1.0)
13 MOTOWELD-S350-AJ2/3 (with STC) Synergic CO2 1.2
14 MOTOWELD-S350-AJ2/3 (with STC) Synergic MAG 1.2
15 MOTOWELD-S350-AJ2/3 (with STC) Independent CO2 1.2
16 MOTOWELD-S350-AJ2/3 (with STC) Independent MAG 1.2
17 MOTOWELD-S350-AJ2/3 (with STC) Synergic CO2 0.9
(or 1.0)
18 MOTOWELD-S350-AJ2/3 (with STC) Synergic MAG 0.9
(or 1.0)
19 MOTOWELD-S350-AJ2/3 (with STC) Independent CO2 0.9
(or 1.0)
20 MOTOWELD-S350-AJ2/3 (with STC) Independent MAG 0.9
(or 1.0)
21 SHINKO ES 350 Synergic CO2 1.2
22 DAIHEN CPV 350 Synergic CO2 1.2
23 MOTOWELD-S500 (without STC) Synergic CO2 1.2
24 MOTOWELD-S500 (without STC) Synergic MAG 1.2
439 of 493