YASKAWA NX100 User Manual

11 Error
11.1 Error Message List
11-9
149235-1CD
RE-CSO-A031
11.1.4 External Memory Equipment
Error No. Data Error Message Contents
3010 - Floppy disk drive cable not connected
3020 -
Floppy disk not inserted into floppy
disk drive
3030 - Floppy disk protection is ON
3040 -
File not saved on floppy disk or
Compact Flash
3050 -
File saved on floppy disk or Compact
Flash
3060 -
Out of memory on floppy disk or
Compact Flash
3070 -
Number of files on floppy disk or
Compact Flash is full
3080 -
I/O error on floppy disk or Compact
Flash
3090
*
Transmission error with floppy disk or
Compact Flash
1 Framing error
2Overrun error
3 Parity error
4 Data code error
5 Data read error
6 Data write error
7 Data time out
8 Serial I/O error
9 Error other than described above
3110 - Syntax error
3120
* HEX code error
1 Specification error of data decode
2 Specification error of EOF record
3 Record type error
4 Total check error of record
3130 - Verify error
485 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C