YASKAWA NX100 User Manual

5 Editing Jobs
5.2 Deleting Jobs
5-6
149235-1CD
RE-CSO-A031
5.2 Deleting Jobs
This operation is used to delete jobs that are registered on the NX100. It can be performed in either the
JOB CONTENT window or the JOB LIST window.
5.2.1 Deleting Jobs on the JOB CONTENT Window
On the JOB CONTENT window, the current edit job is deleted.
Operation Explanation
1 Select {JOB} under the main
menu.
2 Select {JOB}. The JOB CONTENT window appears.
3 Select {JOB} from the menu. The pull-down menu appears.
4 Select {DELETE JOB} under
the pull-down menu.
The confirmation dialog box appears.
When “YES” is selected, the edit job is deleted. When deletion is
completed, the JOB LIST window appears.
When “NO” is selected, the job deletion is cancelled.
JOB
EDIT
DISPLAY
UTILITY
: JOB-A
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
CONTROL GROUP: R1
CREATE NEW JOB
SELECT JOB
CALL MASTER JOB
RENAME JOB
DELETE JOB
COPY JOB
TOOL: 00
STEP NO: 0003
JOB
EDIT
DISPLAY
UTILITY
Main Menu ShortCut
JOB CONTENT
JOB NAME: JOB-A
0000 NOP
0001 SET B000 0
0002 SET B001 1
0003 MOVJ VJ=80.00
0004 MOVJ VJ=80.00
0005 DOUT OGH#(13) B002
0006 WAIT IF IN#(5)=ON
0007 MOVL V=880.0
0008 MOVL V=880.0
0009 MOVL V=880.0
0010 DOUT OGH#(14) B003
0011 DOUT OT#(5) ON
0012 DOUT OT#(6) ON
YES
Delete?
NO
TOOL: 00
CONTROL GROUP: R1
STEP NO: 0003
190 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C