YASKAWA NX100 User Manual

8 Parameter
8.3 Mode Operation Setting Parameters
8-19
149235-1CD
RE-CSO-A031
 S2C211: REMOTE FIRST CYCLE MODE
This parameter sets the cycle that changes from the local mode to the remote mode.
The setting can be made on the OPERATING CONDITION window.
 S2C212: LOCAL FIRST CYCLE MODE
This parameter sets the cycle that changes from the remote mode to the local mode.
The setting can be made on the OPERATING CONDITION window.
 S2C230: POWER ON FIRST CYCLE MODE
This parameter sets the first cycle mode for when the power is turned ON.
The setting can be made on the OPERATING CONDITION window.
 S2C231: TEACH MODE FIRST CYCLE MODE
This parameter sets the cycle that changes from the play mode to the teach mode.
The setting can be made on the OPERATING CONDITION window.
 S2C232: PLAY MODE FIRST CYCLE MODE
This parameter sets the cycle that changes from the teach mode to the play mode.
The setting can be made on the OPERATING CONDITION window.
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
0: Step
1: 1 cycle
2: Continuous
3: Setting retained
308 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C