4 Playback
4.2 Playback
4-12
149235-1CD
RE-CSO-A031
Check Mode Operation
The machine runs without issuing work instructions, such as the ARCON instruction. It is used
primarily to check the path of the program.
Weaving Prohibit Setting during Check Mode Operation
The weaving operation is not executed in the weaving section of the job.
Cancel All Special Operations
All special operations are disabled by the following operation
Operation Explanation
1 Select “CHECK-RUN” under
the SPECIAL PLAY window.
The setting alternates between “VALID” and “INVALID.”
2 Select “COMPLETE.” The window returns to the PLAYBACK window.
Operation Explanation
1 Select “WEAV PROHIBIT IN
CHK-RUN” under the
SPECIAL PLAY window.
The setting alternates between “VALID” and “INVALID.”
2 Select “COMPLETE.” The window returns to the PLAYBACK window.
Operation Explanation
1 Select {EDIT} from the menu.
2 Select “CANCEL ALL
SELECT.”
The message “All special functions canceled” appears.
Special operations are also automatically cancelled if the main power is shut OFF.
To Next Page
Loading...
Need help?
General
