9 Arc Welding Application
9.6 Changing Welding Conditions During Playback
9-59
149235-1CD
RE-CSO-A031
9.6 Changing Welding Conditions During Playback
9.6.1 Function Keys
While the ARC COND ADJUSTMENT window is displayed in the play mode, the welding current and
voltage can be changed using the function keys. The arc welding performance during playback
changes with the welding current and voltage. The changed data of the current and voltage values can
be reflected in the associated instructions or welding condition files.
When [CUR/VOL ] is pressed, the welding current and voltage increase.
When [CUR/VOL ] is pressed, the welding current and voltage decrease.
Each time the key is pressed, the current changes in increments of 1A, and the voltage
changes in increments of 1% or 0.1V.
Changing the welding conditions during playback is enabled only when the command
condition is analog type.
To Next Page
Loading...
