5 Editing Jobs
5.5 Setting Edit Lock on Individual Job Units
5-12
149235-1CD
RE-CSO-A031
5.5 Setting Edit Lock on Individual Job Units
In order to prevent inadvertent changes in registered jobs or data, it is possible to apply an edit lock to
individual jobs. When a job is protected from editing, the job cannot be edited or deleted. Edit lock is
set and cancelled on the JOB HEADER window.
Operation Explanation
1 Select {JOB} under the main
menu.
2 Select {JOB}.
3 Select {DISPLAY} under the
pull-down menu.
4 Select {JOB HEADER}. The JOB HEADER window appears.
5 Select “EDIT LOCK” and set
the edit prohibit.
Each time [SELECT] is pressed, the setting alternates between
“ON” (edit disabled) and “OFF” (edit enabled).
DATA
EDIT
DISPLAY
UTILITY
JOB HEADER
JOB NAME: TEST01
COMM. : THIS JOB IS TEST JOB
DATE
CAPACITY
LINES
STEPS
EDIT LOCK
: 2003/05/20 12:00
: 1024 BYTES
: 30 LINES
: 20 STEPS
: OFF
To Next Page
Loading...
Need help?
General
